• Sourcing Solutions
  • Services & Membership
  • Help & Community

Quick Details

  • D/C: HC06 module
  • Package: SMD for Bluetooth Module
  • Model Number: HC06 Bluetooth Module
  • Type: Voltage Regulator, Drive IC
  • Brand Name: Brand
  • Place of Origin: Guangdong, China (Mainland)
  • Item name: Serial bluetooth module hc-06
  • Bluetooth Version: Bluetooth Specification v2.0+EDR
  • Package Type: SMD
  • Supply Voltage: +3.3VDC 50mA
  • VDD ripple: 100mV max
  • Temperature range: -20 ~ +75 Centigrade
  • Application: Wireless Control
  • UUID: Programmable
  • Port: RS232

Packaging & Delivery

Packaging Details: Item size: 4.3 * 1.6 * 0.7cm
Item weight: 3g
Package size: 9 * 3 * 1cm
Package weight: 8g
devery time: 1-3days
Delivery Detail: Shipped in 2 days after payment

Low Energy BLE Bluetooth 4.0 Serial Port Module CC2540 Transmission iBeacon Module                 

 

 Find More Products, pls clik here

Product Description

 

1. The use of HC-06 core modules from the module, which interfaces including VCC, GND, TXD, RXD, LED for the state output by the foot foot, single state judge already connected Bluetooth KEY pin on the machine, from the invalid.


2.  LED indicates the status of Bluetooth connection, flashing indicates no Bluetooth connection, often bright that Bluetooth has been connected and opened the port.


3. 3.3V LDO, the input voltage is 3.6~6V, unpaired current of about 30mA, paired about 10mA, the input voltage should never exceed 7V!

 

4.  Interface level 3.3V, can be directly connected to a variety of single chip (51, AVR, PIC, ARM, MSP430, etc.), 5V microcontroller can also be directly connected, no need to MAX232 also can not go through MAX232!


5. Open the effective distance of 10 meters, more than 10 meters is possible, but not this distance connection do quality assurance.

 

6, After the pair when a full duplex serial port to use, no need to know any Bluetooth protocol, but only supports 8 bits of data bits, 1 bit stop bit, no parity communication format, which is the most commonly used communication format does not support other formats.

 

7, Did not establish a Bluetooth connection support parameters through the at instruction set baud rate, name, pairing password, set off to save power. After the Bluetooth connection automatically switch to transmission mode

 

8, Small size (3.57cm*1.52cm), the factory patch production, to ensure the quality of the patch. A transparent heat shrinkable tube, dustproof appearance, and anti-static ability.

 

 

 

Specification:

 

Bluetooth protocal : Bluetooth Specification v2.0+EDR 
Frequency : 2.4GHz ISM band 
Modulation : GFSK(Gaussian Frequency Shift Keying) 
Emission power : ≤4dBm, Class 2 
Sensitivity : ≤-84dBm at 0.1% BE
Speed : Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps 
Security : Authentication and encryption 
Profiles : Bluetooth serial port 
CSR chip : Bluetooth v2.0 
Wave band : 2.4GHz-2.8GHz, SM Band 
Protocol : Bluetooth V2.0 
Power Class : (+6dbm) 
Reception sensitivity: -85dBm 
Voltage : 3.3 (2.7V-4.2V) 
Current : Paring - 35mA, Connected - 8mA 
Temperature : -40~ +105 Degrees Celsius 
User defined Baud rate : 4800, 9600, 19200, 38400, 57600, 115200, 230400,460800,921600 ,1382400. 
Pin definition : 
* PIO8 connects with LED cathodea with 470ohm series resistor in between. LED NEGATIVE connects to ground. After powered on, flashing intervals differ in different states. 
* PIO9 is used to control LED indicating paring. It will be steady on when paring is successful. 
* PIO11, module state switching pin. HIGH -> response to AT command; LOW or floating -> regular work status. 
* With build-in reset circuit, reset is completed automatically after powered on. 
* Steps to set to MASTER: 
* Set PIO11 HIGH with a 10K resistor in between. 
* Power on, module comes into AT Command Response Status 
* Open HyperTerminal or other serial tool, set the baud rate 38400, 8 data bits, 1 stop bit, no parity bit, no Flow Control 
* Via serial port, send characters "AT + ROLE = 1 r n",if successful, return "OK r n", where r n is carriage return. 
* Set PIO11 LOW, re-power, then in Master state, automatically search for slave module and connect. 

 

 

 

 How To Test  Debug The Bluetooth Module?

 

 

Packaging & Shipping

 

Item size: 4.3 * 1.6 * 0.7cm
Item weight: 3g
Package size: 9 * 3 * 1cm
Package weight: 8g 

 

 

 

 

 

Our Services

 It's HC-06 bluetooth module.
Allows your device to both send or receive the TTL data via Bluetooth technology without connecting

a serial cable to your computer.
Works with any USB Bluetooth adapters.

Company Information

Our company established in 2009, we have focused on Intellgent products, chip and modules. Support all over the world customers OEM/ODM Service. Welcome to choose Sato, Professional Manufacturer.

 

 

FAQ

 1. Question: Why choose Sato?

     Answer: We can provide high quality modules with best price and service. 

 

 2. Question: Could i take a sample before place an order? 

     Answer: Surely, we can support. 

 

Transaction History of the Supplier

Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.

Transaction Overview

Transactions

Transaction Details

This supplier has completedtransactions with buyers from .

Shipping Destination
Transaction Value
Transaction Date
Email to this supplier
Trade Assurance
China (Mainland)
Transaction Level:
Supplier Assessments:
10 Transactions 80,000+
The supplier’s transactions conduted via Alibaba.com in the past 6 months.